Products

You Haven't Selected A Vehicle Yet. Please Select A Vehicle To See Parts For Your Car.
AEM CDI Pencil Coil
AEM’s new CDI Pencil Coils are now available! Easily allowing the conversion to coil-on-plug ignition systems, these Pencil Coils will work with aftermarket engine-management systems. Additionally, wh...
AEM EMS
AEM's Plug & Play Engine Management System (EMS) plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ...
AEM EMS Sensors and Replacement Parts
AEM offers several sensor and Plug & Pin connector kits for vehicles that require additional outputs and/or upgraded hardware over existing sensors. Available sensors include boost/backpressure sensor...
AEM Engine Position Module (EPM)
AEM's Engine Position Module (EPM) replaces an engine's distributor and allows for the use of coil-on-plug or wasted-park ignition systems on popular V8 and Honda B-, D-, H-, and F-series engines. It ...
AEM Fuel Ignition Controller (FIC)
AEM’s F/IC is a PC-programmable piggy-back controller that allows users to retard timing and add fuel to virtually any engine, even on variable cam timing engines (VTEC, iVTEC, VVTi, MiVEC, etc.). The...
AEM Peak & Hold Injector Driver
AEM’s external Peak & Hold Injector Driver module allows ECU’s that have a saturated injector drive circuit to trigger low impedance injectors with a true 4/1 Peak & Hold injector drive circuit. AE...
AEM Wideband UEGO Gauge
A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-cha...
Aeromotive Electronics
Billet Fuel Pump Speed Controller, P/N 16302 For any pump, on any type of vehicle, the Aeromotive Fuel Pump Speed Controller (FPSC) minimizes hot fuel handling problems for in-line pumps in bypass s...
APEXi Electronics - Accessories
Sensors, Harnesses and Accessories for all your A'PEXi products. ...
APEXi Electronics - Auto Timer
The Apex Auto Timer allows the vehicle to idle for a preset amount of time after the ignition key has been removed. In turbocharged vehicles this prevents hot oil in the engine from coking up in the l...
APEXi Electronics - i-Moni
The i-Moni (i-Monitor) is a simple plug-and-play monitoring device which instantly installs using any factory ISO 14230 OBD II diagnostic port. The i-Moni offers real time data display of up to four d...
APEXi Electronics - Power FC
The Power FC proudly stands as A'PEXi's answer to the constraints and limitations associated with most piggy-back style fuel controllers. The Power FC is a complete, stand alone, total engine manageme...
APEXi Electronics - Rev / Speed Meter GP
The new Rev/Speed Meter GP is a complete multi function measuring device designed to measure and monitor data such as vehicle speed, engine RPM, and elapsed times. However, the strength of the new uni...
APEXi Electronics - S-AFC II
The Super AFC II (Air Flow Converter) is the industry standard for sub computer fuel control. The S-AFC II is designed to fine tune and "squeeze" power out of existing engine setups by allowing the us...
APEXi Electronics - S-AFC Select
We are pleased to announce that the industry standard S-AFC II fuel computer can now be enjoyed by European car enthusiasts! The Super AFC (Air Flow Converter) Select is based off of the world reno...
APEXi Electronics - SAFC NEO
The SAFC NEO marks the newest edition to the world famous Super AFC line of piggy back fuel controllers. Building upon the powerful SAFC II, the AFC NEO has taken piggy back style fuel control to a ne...
APEXi Electronics - V-AFC II
The highly anticipated release of the new A'PEX VAFC II started a new revolution in piggy-back style fuel controllers. Building upon the world wide success of the previous VAFC, the new VAFC II has ta...
Autometer Test Equipment
Autometer offers a multitude of product for Testing and Diagnosis at the track and under the hood....
Edelbrock Fuel Flow Test Tool
The only way to ensure that you have adequate fuel pressure for your nitrous system is to measure the "flowing pressure" using a flow test tool like our #76506. This tool features an easy-to-read fuel...
Edelbrock Map Sensor Voltage Clamp
Edelbrock QwikData - Sensors/Thermocouplers/Meters
Edelbrock offers a complete range or Sensors, Thermocouplers and Meters for your Edelbrock QwikData Data Logging Unit....
Edelbrock QwikData - TK Sensors & Signal Processors
Edelbrock offers everything you need to keep your Edelbrock QwikData Unit up and running 100% of the time....
Flex-a-Lite Fan Accessories
Gizzmo CamFC
The CamFC has an AFC (air/fuel controller) onboard so that fundamental fueling issues related to the addition of tuning accessories such as extractors, exhausts, adjustable cam gears, filters and mild...
Gizzmo Fuel Cut Defender
The Gizzmo FCD (Fuel Cut Defender) allows a vehicle to run a higher boost level without the vehicles ECU cutting the fuel supply at the factory specified boost level. The Gizzmo FCD totally isolates ...
Gizzmo KMon
The Gizzmo KMon professional knock monitoring kit takes tuning to the next level. The KMon was designed with leading tuners for tuners with endless hours of dyno development as a major component in th...
Gizzmo Launch Interface
Gizzmo's launch interface integrates with the Gizzmo Tach Recall Shift light to enable the fully adjustable launch control function. The launch control function induces sequential misfire events at th...
GReddy Boost Cut Controller
GReddy Boost Cut Controllers (BCC) allows the factory ECU limiters (or "fuel cut") to be eliminated electronically, by wiring the unit directly into the factory ECU harness. The Speed Cut Controller (...
GReddy e-Manage
GReddy’s e-Manage is a cost effective programmable engine management system that allows you to properly tune your factory engine control without having to change the entire factory ECU system to an ex...
GReddy e-Manage Ultimate
The GReddy e-manage Ultimate is as close to a stand-alone management system as you can get while maintaining the best features of a "piggy-back" engine management; an economical price, the usage of ex...
GReddy e-Manage Ultimate Harnesses
GReddy e-Manage Ultimate Harnesses...
GReddy Electronic Switches
Our Remote Switching System (RSS) allows the user hands-free modulation between high boost and low boost settings on either of our PRofec boost controllers. It can also be used as a momentary switch f...
GReddy Infometers
Designed with a compact plug and play color LCD display, the Informeter allows you to monitor, set warning points and datalog your vehicles performance though it's own On Board Diagnostic sensors. Sel...
GReddy Profec Accessories
GReddy Profec E-01
The ultimate in electronic boost control is incorporated in our multi-tasker, the PRofec e-01. Designed as a combination boost-controller, data display/logger and original e-manage programmer. The e-0...
GReddy Speed Cut Controller
GReddy Turbo Timer
Designed to prolong the life of your turbocharge, while adding connivance. GReddy Full Auto Turbo Timers allow a vehicle to idle the engine for a timed period, with the ignition key removed. This conv...
GReddy V-Manage
V-Manage The V-Manage, Variable Valve Timing Controller was designed by GReddy engineers to take advantage of some of the modern technology OE Manufactures* are now commonly incorporating into th...
HKS ALC II (Automatic Line Controller)
The HKS ALC II has been developed as a plug-in interface with factory A/T Control Unit of the computer controlled automatic transmission on the ‘90-’96 Nissan 300ZX. The ALC II is designed to maintain...
HKS ETCS (Electronic Traction Control System)
The HKS ETCS-Less Kit, bypasses the ETCS function on the throttle-body on ‘93-‘98 Twin Turbo Supras w/manual transmissions. The ETCS-Less kit prevents traction control activation by eliminating the me...
HKS EVC Components
The HKS EVC is the hottest Boost Controller on the market - but it can always be better. Grab a Display Stand or Harness to complete that custom Install. Need some T-Fittings or Vacuum Hose when ins...
HKS EVC Install Kit
HKS EVC Installation kits are vehicle specific supplement kits of the standard hardware & fitting kit included in each EVC unit. The kits supply additional specialty hardware that is needed or recomme...
HKS Fan Controller
The HKS Fan Controller has been developed to control factory or aftermarket electronic cooling fans. This unit can control one fan at two speeds or two fans at one speed, and can set the fan(s) to tur...
HKS FCD (Fuel Cut Defencer)
The HKS FCD is an electronic device developed to properly raise the factory fuel cut level on factory turbocharged vehicles. As modifications are made to optimize engine performance, the factory fuel ...
HKS GCC (Graphic Control Computer)
The HKS GCC (Graphic Control Computer) is an electronic tuning component which adds flexibility to the fuel tuning capabilities of the VPC, PFC F-CON or F-CON S. It plugs into either the VPC or F-CON ...
HKS PFC F-CON (Programed Fuel Computer)
The HKS PFC F-CON is a plug-in fuel management system designed to supplement and refine the OEM fuel curve to maintain a proper air/fuel mixture when increasing boost pressure in turbocharged applicat...
HKS PFC F-CON Components
Enhance or modify a VPC. Available are special intake adapters and replacement parts such as sensors, sensor harnesses and mounts....
HKS PFC F-CON Harness
Vehicle specific wiring harnesses to allow simple plug-in integration of VPC inbetween the factory wiring harness and ECU....
HKS PFC F-CON ROMs
Vehicle specific ROM microchips with tuning level specific tuned fuel map programs for PFC F-CON units. ...
HKS REV AD
The HKS RevAd is an electronic device designed to multiply a single digital 0-5volt signal. Many electronic air/fuel and timing controllers require a 0-5volt digital signal to operate properly. The HK...
HKS RPM Signal Level Converter
The HKS RPM